Description

Models

Structures

• Exclusive ball-and-socket draft-frame pivot and seven-position saddle provide best-in-class blade setup and improved ditch cutting, ditch cleaning, and reach outside the tires.
• Long-term durability is bolstered by larger-than-usual articulation joint roller bearings.

Six-Wheel-Drive Configuration

• Putting its entire weight and all six tires to work, their job-proven dual-path hydrostatic drive boosts productivity in all kinds of work.

Engine

• Ash-service intervals for the diesel particulate filter (DPF) are condition based and may not be necessary until the first engine overhaul. Machine application, regular maintenance practices, and type of lubrication oil impact intervals.
• Exclusive cooling package eliminates stacked coolers. Pivoting coolers together with the hinged swing-out fan, access to the cores is quick and cleaning is easy.
• Standard hydraulically driven cool-on-demand reversing fan slows when the engine is idling to reduce fuel consumption and bystander noise levels. Reversing fan automatically cycles at operator-selected intervals to eject debris from the radiator and cooler cores.

Grade Pro (GP)

• For unsurpassed productivity with a grade-control system, opt for a GP model. Eight armrest-mounted fingertip-actuated controls, including steering lever, are arranged in the industry-standard pattern on each side of the steering wheel. No extra levers required for grade control.
• Automated cross-slope simplifies holding a consistent slope by reducing operation to a single lever.
• At the touch of a button, return-to-straight automatically straightens an articulated frame. For quicker work cycles.

WorkTools

• Jackscrew-adjusted side-shift wear inserts keep the moldboard tight and precise. Takes only minutes to return tolerances to factory spec.
• Two-hour replaceable super-tough draft frame and circle wear inserts minimize maintenance labor.
• Choose from front scarifier, mid-mount scarifier, or rear scarifier/ripper. There's also a front-lift option that simplifies adding a bulldozer blade or V-plow.

Serviceability

• Large service doors open wide, and same-side daily checkpoints are conveniently grouped for easy ground-level access.

Visibility

• Narrow center console and streamlined saddle bring the blade and front tires within focus.
• On GP models control linkages are eliminated and large lower front windows further enhance visibility.

Industry-First SmartGrade™ Configurations

John Deere SmartGrade Motor Graders are fully integrated and calibrated from the factory, arriving at your jobsite ready to work.

Integration into the SmartGrade cabin and structures helps shield key grade-control components such as wire harnesses and sensors from damage and theft.

Powertrain

• Automatic differential lock stays engaged when travelling straight, disengages in turns exceeding 10 degrees, and re-engages when returning to straight. Although fully automatic, this feature can be overridden by the operator via toggle switch.

Specifications

• CAPACITIES - Fuel Tank, ltr (gallons (US)): 416.5 (110)
• CAPACITIES - Hydraulic Tank, ltr (gallons (US)): 60.5 (16)
• DIMENSIONS - Bank Angle, � �: 90
• DIMENSIONS - Bladebase, mm (ft/in): 2570 (8 ft 5 in)
• DIMENSIONS - Circle Rotation, �: 360
• DIMENSIONS - Frame Articulation, � �: 22
• DIMENSIONS - Frame Circle Diameter, mm (inches): 1524 (60)
• DIMENSIONS - Height Over ROPS, mm (ft/in): 3180 (10 ft 5 in)
• DIMENSIONS - Hydraulic Blade Tip - Forward, �: 42
• DIMENSIONS - Hydraulic Blade Tip - Rearward, �: 5
• DIMENSIONS - Moldboard - Lift Above Ground, mm (inches): 490 (19.3)
• DIMENSIONS - Moldboard Height, mm (inches): 610 (24)
• DIMENSIONS - Moldboard Sideshift - Left, mm (inches): 683 (26.9)
• DIMENSIONS - Moldboard Sideshift - Right, mm (inches): 683 (26.9)
• DIMENSIONS - Overall Length, mm (ft/in): 8890 (29 ft 2 in)
• DIMENSIONS - Shoulder Reach - Left, mm (ft/in): 2083 (6 ft 10 in)
• DIMENSIONS - Shoulder Reach - Right, mm (ft/in): 2083 (6 ft 10 in)
• DIMENSIONS - Thickness - Moldboard, mm (inches): 22 (0.88)
• DIMENSIONS - Turning Radius - Minimum, m (ft/in): 7.21 (23 ft 8 in)
• DIMENSIONS - Wheelbase, mm (ft/in): 6160 (20 ft 3 in)
• DIMENSIONS - Width - Moldboard, mm (ft/in): 3660 (12 ft )
• DRIVELINE - Displacement, ltr (Inches�): 9 (548)
• DRIVELINE - Engine Manufacturer : John Deere
• DRIVELINE - Engine Model: PowerTech PSS 9.0L
• DRIVELINE - Engine Output - Net, kW (hp): 205 (275)
• DRIVELINE - Number Of Speeds - Forward: 8
• DRIVELINE - Number Of Speeds - Reverse: 8
• DRIVELINE - Service Brake Actuation: Hydraulic
• DRIVELINE - Service Brake Type: Multiple Wet Discs
• DRIVELINE - Tire size - Standard: 14.00 - 24
• DRIVELINE - Torque Rise, %: 55
• DRIVELINE - Transmission Manufacturer: John Deere
• PERFORMANCE - Loading - Front Axle, kg (lbs): 4881 (10760)
• PERFORMANCE - Loading - Rear Axle / Tandem, kg (lbs): 12501 (27560)
• PERFORMANCE - Pump Flow, lt/min (gallons (US) / min): 212 (56)
• PERFORMANCE - Relief Pressure, kPa (PSI): 18961 (2750)
• PERFORMANCE - Speed 8 - fwd, kph (mph): 45.5 (28.3)
• PERFORMANCE - Speed 8 - rev, kph (mph): 45.5 (28.3)
• PERFORMANCE - System Voltage, V: 24
• WEIGHTS - Weight With Push Block & Ripper, kg (lbs): 20217 (44570)

Features

• Blade Pull: <span class="Apple-tab-span"> </span>22,453 kg (49,500 lb.)
• Operating Weight: 20,217 kg (44,570 lb.)
• Max Net Power: 205 kW (275 hp)

Copy Set