John Deere 655K Crawler Loader
Make | John Deere |
Model | 655K |
Type | Crawler Loaders |
How can we help?
Description
- Net Power: 116 kW (155 hp) @ 1,400 rpm
- Operating Weight: 18 422 kg (40,614 lb.)
- Heaped Capacity: 1.9 m3 (2.4 cu. yd.)
- Breakout Force: 148 kN (33,271 lbf)
Models
Engine
FT4/Stage IV-compliant 6.8-L John Deere PowerTech™ engine boasts a boost in horsepower and standard Eco mode, for maximum fuel economy without loss of performance.
Auto-idle helps save fuel by reducing engine speed when the crawler loader is not moving and no functions are being activated.
Hydraulics
Dual-path hydrostatic (HST) transmission allows you to carry a full load through turns without losing material.
HST drivetrain and load-sensing hydraulics deliver fatigue-beating, low-effort response and control, at all times and in all conditions.
Hydraulically driven fan runs only as needed, for cooling and fuel efficiency.
Transmission
Counter-rotating tracks boost maneuverability on crowded jobsites.
Infinitely variable speed range to 6.2 mph
Serviceability
Heavy-duty undercarriage is sealed, lubricated, and built to last.
Swing-out side shields and tilt-out grille enable access to both sides of the coolers, for low effort debris removal.
Controls
Single-lever joystick or two or three-lever hydraulic controls - choose the layout that best fits your operator’s style.
Control the throttle using buttons on the sealed-switch module.
Specifications
- CAPACITIES - Fuel tank capacity, ltr (gallons (US)): 263 (69.5)
- CAPACITIES - Implement hydraulic tank, ltr (gallons (US)): 121.5 (32.1)
- CAPACITIES - Shovel 1 capacity, m3; (yd3;): 1.9 (2.4)
- DIMENSIONS - Bucket pin height, mm (ft/in): 3710 (12 ft 2 in)
- DIMENSIONS - Bucket reach - max, mm (ft/in): 1036 (3 ft 5 in)
- DIMENSIONS - Digging depth, mm (inches): 152 (6)
- DIMENSIONS - Ground clearance, mm (inches): 395 (15.6)
- DIMENSIONS - Max. height, mm (ft/in): 3120 (10 ft 3 in)
- DIMENSIONS - Overall length, mm (ft/in): 6735 (22 ft 1 in)
- DIMENSIONS - Shovel 1 dump height 45 max, mm (ft/in): 2665 (8 ft 9 in)
- DIMENSIONS - Shovel 1 width, mm (ft/in): 2470 (8 ft 1 in)
- DIMENSIONS - Steering clutches and brakes: No
- DIMENSIONS - Track gauge - standard, mm (ft/in): 1740 (5 ft 9 in)
- DIMENSIONS - Track length on ground, mm (inches): 2414 (95)
- DRIVELINE - Displacement, ltr: 6.8 (415)
- DRIVELINE - Emission Rating: Tier 4
- DRIVELINE - Engine Manufacturer : John Deere
- DRIVELINE - Engine Model: PowerTech PVS 6068
- DRIVELINE - Engine Output - Net, kW (hp): 116 (155)
- DRIVELINE - Final drive type: In-line Drive Motor - Double Reduction Planetary
- DRIVELINE - Ground Contact Area, cm2; (Inches2;): 24622 (3816)
- DRIVELINE - Rated Speed, rpm: 1700
- DRIVELINE - Track rollers per side - std: 6
- DRIVELINE - Track shoe pitch, mm (inches): 190 (7.5)
- DRIVELINE - Track shoe width, mm (inches): 510 (20)
- DRIVELINE - Track shoes per side - std: 38
- DRIVELINE - Transmission type: Hydrostatic
- PERFORMANCE - Alternator output, Amp: 100
- PERFORMANCE - Breakout force - max, kN (lbf): 148 (33271)
- PERFORMANCE - Ground bearing pressure - standard, kPa (PSI): 73.7 (10.7)
- PERFORMANCE - Pump flow, lt/min (gallons (US) / min): 189 (50)
- PERFORMANCE - Pump type: Piston Pump - Load Sensed
- PERFORMANCE - Relief pressure, kPa (PSI): 26028 (3775)
- PERFORMANCE - Static tipping load shovel 1, kg (lbs): 12443 (27432)
- PERFORMANCE - Voltage, V: 24
- WEIGHTS - Operating weight std, kg (lbs): 18422 (40614)
Features
- Heaped Capacity: 1.6–1.9 m3 (2.1–2.4 cu. yd.)
- Operating Weight: 18,422 kg (40,614 lb.)
- Net Power: 116 kW (155 hp) at 1,700 rpm
- Breakout Force: 148 kN (33,271 lbf)
Copy Set
Engine
FT4/Stage IV-compliant 6.8-L John Deere PowerTech™ engine boasts a boost in horsepower and standard Eco mode, for maximum fuel economy without loss of performance.
Auto-idle helps save fuel by reducing engine speed when the crawler loader is not moving and no functions are being activated.
Hydraulics
Dual-path hydrostatic (HST) transmission allows you to carry a full load through turns without losing material.
HST drivetrain and load-sensing hydraulics deliver fatigue-beating, low-effort response and control, at all times and in all conditions.
Hydraulically driven fan runs only as needed, for cooling and fuel efficiency.
Transmission
Counter-rotating tracks boost maneuverability on crowded jobsites.
Infinitely variable speed range to 6.2 mph
Serviceability
Heavy-duty undercarriage is sealed, lubricated, and built to last.
Swing-out side shields and tilt-out grille enable access to both sides of the coolers, for low effort debris removal.
Controls
Single-lever joystick or two or three-lever hydraulic controls - choose the layout that best fits your operator’s style.
Control the throttle using buttons on the sealed-switch module.